If you’ve previously worked on the Mk. IV kit – this one can be a quick and pleasant OOB build – few parts and the fit is rather good (no filler on this one).
A few letdowns, though:
– no parts for the deep-wading equipped Canadian Churchills for operation Jubilee;
– no corrections made for the errors in the instructions;
– thicker sprue gates.
As you can see from the images the results of the last problem are quire evident on the tracks and that’s partially my fault – had I selected the proper run placement these would have faced INSIDE instead of outside.
You do remember from the Mk. IV article I’ve started with the turret – and I did it with this kit, too. It’s very quick build, all you need to do is blank off the turret luggage bin, as the side facing the turret is open. I also filled what looks like angular ejector marks next to the locating holes for the fire extinguishers on it.
As the hull is directly taken from the Mk. IV kit the instructions will – again – make you glue the wrong halves for the driving sprockets and the idler wheels. To sum it up:
Dragon has moved ahead with their Churchill saga and just a few months later released a Mk. III to the delight of some of us and the horror of others.
Box top
Thanks to the kind editors of Armorama I’ve had the chance to play with the newer release, numbered 7396. Basically it’s the same hull as the Mk. IV release (kit 7424) with a brand new cupola, an extra fuel tank and a different engine deck.
Parts are spread over 5 separately packed sprues – 71 grey styrene and 2 DS runs. There are paint references and decals for three tanks:
