OKB Grigorov’s M109 complete

Since I needed decals in order to complete the model I had to raid the kit collection and source some. The victims were an Italeri M113 and a Revell (Matchbox) M40 SPG. I also used the lettering from their sheets to make up a code for a 5-16th Artillery machine (but sans the yellow weight class sign). Mr. Decal Softer helped the markings get grip and conform to the model surfaces.

The decals were sealed, and I used minimal amount of pigments to add to the dusty appearance. Diluted H2Oils (Burnt Umber and Paynes Grey) were used to simulate the leaks. Mixed with some dry pigments they helped create the mud buildup on the front upper sheet.

read more

Building OKB Grigorov’s M109 (kit 72002)

Alright – so why do I keep labeling articles using the full kit name and number? Because most companies “milk” their designs and have multiple releases using the same basic kit (or some of it). OKB Grigorov has already released the A1 and A2 versions of the M109, kits No 72004 and 72005, respectively.

Back to our initial SPH variant.

What’s the first thing we usually do? Dry fit major components so we’re able to judge size and get motivated by the upcoming result! I sanded the turret base and the hull recess that is intended to accept it a bit. The model is pretty small, yet rather heavy for its size.

read more

OKB Grigorov’s M109 US SPH, kit 72002

Alright, another resin + PE monster from OKB Grigorov, and despite it’s lower Cat. No. (the AT-T was 72007) I got it in the beginning of this year to build for a review.

I must say I liked the kit from first sight. Relatively small number of parts that will make for a detailed, compact model of a vehicle that has a bunch of modifications still in use today, 50 years after its introduction.

So – onto the kit.

All the parts are packaged in zip-lock bags, all protected by bubble wrap and a sturdy white cardboard box. There are

read more

Dragon’s 1/72 Churchill Mk. IV completed

Time to show the finished product.

Decals as per DML’s instructions. I used the 4 in the red circle and it’s a good think the Dragon boys and gals had included a spare. Decals were tamed using my favorite Mr. Mark Softer from Gunze, then covered with Vallejo matt varnish.

Since the tank has been painted with about 7 variations of green I used a bit less pigment powders (Agama Sand, Dust and a bit of white) than usual to weather it. A bit of black behind the exhausts, around machine guns and gun muzzle and again a coat of Vallejo flat.

read more

Building Dragon’s 1/72 Churchill Mk. IV tank, kit 7424

Another Armorama review build. This was one of those rare occasions when I decided to strictly follow the instructions.

I started by test-fitting the turret top and bottom. The locating pins in the turret base detail are too thick, so a step step was formed – they were quickly removed.

Turret with its bottom end up - the step is rather evident...
Turret with its bottom end up – the step is rather evident…

Since two options were presented for the main turret armament (parts C3 and B7) I went with the longer one 🙂 The aft end of the detail required some sanding to fit in the turret mask. Next, the Besa machine gun was glued in the mask. After the assembly was glued to the turret base (C5),  I added the top detail (C9) to close the turret.

read more