Alright – so why do I keep labeling articles using the full kit name and number? Because most companies “milk” their designs and have multiple releases using the same basic kit (or some of it). OKB Grigorov has already released the A1 and A2 versions of the M109, kits No 72004 and 72005, respectively.
Back to our initial SPH variant.
What’s the first thing we usually do? Dry fit major components so we’re able to judge size and get motivated by the upcoming result! I sanded the turret base and the hull recess that is intended to accept it a bit. The model is pretty small, yet rather heavy for its size.
Alright, another resin + PE monster from OKB Grigorov, and despite it’s lower Cat. No. (the AT-T was 72007) I got it in the beginning of this year to build for a review.
I must say I liked the kit from first sight. Relatively small number of parts that will make for a detailed, compact model of a vehicle that has a bunch of modifications still in use today, 50 years after its introduction.
So – onto the kit.
All the parts are packaged in zip-lock bags, all protected by bubble wrap and a sturdy white cardboard box. There are
– windows in the doors, attempted imitating seals with acrylic gel and paint;
– weathering, and a lot of it. An experiment with a new technique went so far as to lead to completely strip-down of the paint on the hull/cargo bed assembly.
In the first part of the build I basically completed the lower half of the vehicle and the cargo bed. Back to the crew compartment.
The AT-T’s front lights reside at the very front of the bonnet/hood on metal supports. In the kit these are PE parts, which supposedly butt-join the resin engine compartment, and on top of which the lights are glued. Images of broken-off detail in my mind lead me to soldering a piece of wire (in red) through each support like this (looking from the front):
I started construction with the chassis tub. First thing to do is gluing the back wall. Next I cut the suspension arms out of the casting block and it turned out the holes for their pins are much too small. Off with the pins, arms are drilled through, as is the tub itself – naturally observing the locations of the original holes.
I decided to use thick copper wire passing through the whole tub to make new pins. This would ease me in terms of affixing the pins and make the whole thing stronger.
After delivering their exquisite MiG-21MF the Eduard crew went on to produce a number of sets to further improve the appearance of this important machine in 48th scale.
One of the areas that would definitely benefit from an aftermarket set are the tires. Dimensionally correct the kit items are really “bald” and flattening them could result in holes. This set replaces all three kit wheels with beautifully cast resin items, thread present on all three of them. Two hub options, etched details and masks are also included:
