Tag Archives: Revell

Pz Kpfw V Panther – tracks in 1/72

The Panther is one of the most recognizable tanks of WWII, right up there with the slow and boxy but feared Tiger I. With ~6,000 examples per Wikipedia the Panther is the third most produced tracked German AFV after the Stug III (9,408 built), and the workhorse of Panzerwaffe, the Pz IV (8,298 made).

No wonder that number of kits on the market follows closely the other 2 vehicles. Naturally there are various renditions of the vehicle and its details, with the tracks varying from flat to highly detailed. Below are a few examples from 6 different kits:

read more

Trumpeter 1/72 Jagdtiger (Porsche suspension) with Zimmerit

Jagdtiger (Porsche) on 1/72, Trumpeter
Jagdtiger (Porsche) on 1/72, Trumpeter

The Jagdtiger was a last-ditch weapon, a self-propelled anti-tank bunker, that had zero impact on the outcome of WWII. Regardless, a lot of model companies offer both variants of this machine. My main reason for getting the Trumpeter set with Porsche suspension was the small number of parts and the related ease of construction. It promised a rather uninvolved build as I imagined a straight OOB project done over the weekend. Yeah, right šŸ˜€

The first session was promising, I managed to remove the main components from the sprues, clean up and assemble the bogies in a couple of hours. Instead of going full AMS I decided to plug the locating holes for the spare track hangers, and go “bald”.

read more

T-72 and T-90 wheels in 1/72: OKB Grigorov vs kit wheels

T-72B in Sofia, National Museum of Military History
T-72B in Sofia, National Museum of Military History

The T-72 main battle tank is one of the most recognizable combat machines very much thanks to the mass of real-time broadcast conflicts itā€™s participated in during the past 3 decades. A lot of companies have released model kits, including in 1/72 scale.

Two types of roadwheels have been used during the 72ā€™s production run: the ā€œ8-holeā€ (early) and the ā€œ6-holeā€ (late) types. They were identical in diameter and rim width ā€“ 750mm and 190mm respectively. This scales down to approx. 10,4 and 2,6mm in 1/72.

read more

Revell 1/144 MiG-29 “The Swifts”, kit 04007

Revell 04007 MiG-29 "The Swifts"
Revell 04007 MiG-29 “The Swifts”

MiG-29 has attracted the attention of multiple scale model manufacturers even when it was only seen in blurry pictures. Available kits vary in scale, accuracy and markings in area so wide it would take a book to describe.

The reason I picked up Revell’s 1/144th MiG-29 was its R-60 missiles that I used in another model. I was thinking of giving it away, because strange as it may sound I am not a big fan of the aircraft for a number of reasons. I elected to keep it though, so it will be briefly presented in this article.

read more

Pz VI Tiger Ausf. E – Revell 1/72

The finished article. Paints and effects used:

– acrylic paints by Gunze, Tamiya, Vallejo for the camo job,

– MM Gun Metal for the armament and track base color,

– Tamiya X-11 for track bare metal effect,

– various dark metal shades for the chipping effects,

– thinned Revell browns used for the washes (darker on the hull, lighter on the tracks),

– Agama patinators and Koh-I-Noor pastel chalks for dust, smoke and heat staining on the exhaust heat shields,

– Alclad II Engine manifold on the exhausts for that extra oily exhaust look, feel and SMELL,

read more

OKB Grigorov’s Winterketten and Ostketten for Pz III/IV family

OKB Grigorov's Winterketten and Ostketten
OKB Grigorov’s Winterketten and Ostketten

Today I received two of OKB’s latest releases – their Winterketten and Ostketten resin tracks for the Pz III/IV family of armored vehicles. I was impressed with the casting and level of detail, so I am in a hurry to show you what the fuss is all about.

First thing about the track sets is that they are provided in 4 bands per set, each about 102mm long, like so:

OKB Grigorov Ostketten set S72057
OKB Grigorov Ostketten set S72057

Considering you need about 175mm per vehicle side for the lenghtened III/IV chassis on which a Hummel or Nashorn was based – you’re pretty well catered for in terms of spares.

read more

Building Revell’s Tiger E in 1/72

First thing to do is to get rid of the molded-on tools. Considering the absurd ideas to make the hammer our of 3 layers of PE and the jack out of 9 layers – some tools were replaced with items from the Attack’s set “Implements and tools”, and I kept the jack almost stock. For the time being I glued on the retaining PE clasps and straps for them and the tow cables.

Stripped from the tools - PE added
Stripped from the tools – PE added

Aside from the molded-on tools and the symmetric turret there are few other issues with the Revell kit:

– directly sticking the spare tracks to the turret walls – there are brackets for this on the actual machine – I used PE items form the Part set.
– the gun that is very crudely molded in one piece together with the muzzle brake – replaced it with RB Models item 72B26 turned aluminum barrel with bronze muzzle brake. Since the barrel is turned there are visible traces from the lathe on its surface – I sanded down with 800 and 2000-grit sandpaper.

read more

1/72 Part PE set P72-093 for Revell’s Tiger Ausf.E

Years ago the Poles from Part have released 3 PE sets to improve the molded-on details of both Revell’s Braille scale Tigers. The three packs basically have the same main fret and mesh set, plus a third metal sheet that holds details specific to the version –Ā P72-092 for the Ausf. H,Ā P72-093 for the E, andĀ P72-094 for the H1.

I got myself a set for the late variety, and here it is.

1/72 Part PE set P72-093 for Revell's Tiger Ausf.E - Fret A
Fret A

As you can notice there’s heaps of tiny detail, some so small really you will not even bother remove it from the metal sheet. There’s useful stuff like all the tool retaining straps and clasps, the side mud flaps, the exhaust heat shields, the ammo belt and can for the commander’s MG, as well as the mesh screens that are SO missing from the Revell kits.

read more

Revell 1/72 Pz. Kpfw. VI Ausf. E, kit 03116

The Tiger tank needs no introduction, so I’ll get straight to the model kit.

The Revell offering has been around for more than a decade – it was the first MODERN rendition of this important machine after the Hasegawa and Fujimi (which is 1/76) offerings. Technology advances have made the inclusion of much better detail possible, so at the time of release the model was what we call “state of the art”. After the very early H model came the late Ausf. E, with the appropriate changes – new wheels and different right turret half.

read more

Revell P-51B (04182): a weathering experiment

“An old soldier, but not faded away yet” – that’s the way the fate of this kit can be summed up – at least in my own collection.

It all started up about 5 years ago with the impulsive purchase of the kit. Nice details, simple construction, interesting decal options (both shark-mouthed), and a comprehensive weapon set at a very reasonable price. A few months later it was destined to become the cure for a modeller’s block. Then it was cutting the flaps out,Ā  then some scratchubilt details in the cockpit. Guns are replaced with needles of two different diameters, filling and sanding of fuse seam are in order. So far so good (that’s middle of 2007):

read more