It’s finally done. After the splattering nozzle my masterful hobby-time organizational skills delayed this pic set.
Tracks: as most of them is rubber – Revell 78 was used to mimicking the areas. Glued over the wheels (sand center + 78 again for the rubber bandages) with Loctite gel. Inserted Q-tips to provide the sag – worked like a charm!
Cupola vision blocks were done the following way:
– the recesses were brushpainted Tamiya XF-11;
– Revell enamel transparent blue was mixed with their own gloss cote and painted over the XF-11;
Alright, it’s been a while since I started this kit, and the source of the delay has been the overspray due to cracked airbrush nozzle. While waiting for a replacement I replaced most of the detail on the top.
I removed the antiskid plates (don’t ask – don’t tell) and re-did the antislip coating only. Few of the original plastic handholds are still in use, most were replaced with wire – as were the DML PE parts, since most were too flimsy and two-dimensional. I also added the rope tie-downs at the 4 corners.
This tiny, but important tank, is the third venture of OKB Grigorov into the “complete AFV kits” world. The set is completely made up of resin castings (23 parts) and etched metal (two frets with a total of 32 parts). It represents the later variety of the T-60: the road wheels and the idler are identical and maximum armor thickness reached 35mm.
To protect “the precious” the company has placed it in a small, sturdy box – everything carefully packed in bubble wrap.
Inside the T-60’s box
You can see that resin castings and the etched frets are in separate zip-lock bags to prevent loss, bending and scratching.
This Revell kit represents the main NATO version of recce Phantoms in 1/72. It’s the first of the Phantom kind in my collection, but certainly not the last one. My issue is set to depict eiher a commemorative all-black scheme for the disbandment of AG52 (Recce Group 52), or a regular AG51 “Immelman” bird, painted in the “Norm 83” pattern of three greens.
The attractive scheme is achieved using the decals below. The main artwork for the aircraft bottom has been pre-cut by Revell to match the various gear covers when open.
This aircraft is – to me at least – at the top of the evolution pyramid amongst single-engined piston fighters. Years of design honing and fine-tuning have resulted in this series of the fastest, most maneuverable, most heavily-armed, the highest-flying and the most technologically advanced aircraft to date (1945). I was happy to get the kit and am more than willing to build it at first opportunity.
And it is rather good I have to say. First released in 1992 it features 90 parts according to my counting (78 in grey plastic, 2 transparent and 10 PE). Beyond the actual Ta-152 airframe parts there is a detailed engine bay (with engine and cannon), which could be posed open. Some have gone so far in criticizing the kit as to call it “over-engineered”, and hail the Aoshima H-0 and H-1 sets (which are based off the Dragon offering) as a better solution due to the small number of parts (about half the DML count) and lower price. I personally wouldn’t replace my kit for the Japanese one, and the pics below will tell you why.
The Nachtigall (Nightingale) is a radar-equipped variant of the Ar-234 jet bomber. It is armed with an underslung pod with two 20mm cannon, holding 200 rounds per gun.
Well, this is what the kit basically is – an armed bomber. So sprue A holds completely uneventluf stuff – common parts like fuselage, horizontal stabilizers, undercarriage, and even recce cameras intended for the bomber.
Sprue A
Sprue B has the wings, engines, and cockpit section – the whole nose is a separate unit to allow for construction of various versions. Each Jumo engine is made up by two halves, an inlet with integrally molded compressor face, and an exhaust “egg” – much similar to the Revell’s Me-262 (or vice-versa?).
A member of the “Golden Wings” series from the early 90s this kit represents a Luft ’46 aircraft. Me-1101’s partially completed prototype was captured by US forces at the end of WW2. It later flew in The States as Bell X-5, the first aircraft with variable wing geometry. The radar-and-missiles equipped night fighter you see below must only have been a paper-only project…
Me-1101 Nachjager, Dragon 5014 – box top
The original aircraft did not feature a T-tail, it might as well have been a Dragon invention. Anyway – liked the look of the thing and when opportunity came I snatched the kit off EvilBay. It arrived in excellent condition and revealed a curious packaging pattern – all sprue bags and the decals placed in a big bag stapled to the side.
After so much waiting the new Mi-24 by Zvezda is finally in my hands. Probably one of the most awaited models in the 72nd scale, this impressive offering has no less than 284 parts and allows you to build the most accurate “Crocodile” in the scale to date.
One of the perks you get with the kit is the complete engine/gearbox setup that allows you to build your Hind all opened up (you’d still need to make the compartment plumbing yourself or wait for Eduard’s go at it though). Pick a V version with the YakB-12,7 Gatling gun, or a GSh-23-2 armed VP. Hang some serious firepower under the wings, pop the two pilots in the cockpits and let it rip!
The HobbyBoss effort has been on the market for some time already and it really retired the previous kits in the scale. A detailed cockpit, a pretty serious and well-detailed arsenal that could actually fill the pylons of 4 Hinds, better shapes, more adequate rotor heads, engraved panel lines and decent surface details. Most modelers also notice it’s a good fitter, so for about 10 euros it came as a notable bang for the buck.
The few issues noted on The Net are the overrepresented raised lines on the main rotor, the single-detail canopy (common for both cockpits) and the seam line going down the middle of it. But it still started a new era for the fans of the feared “Crocodile” – the biggest, toughest, most popular attack helicopter in the world.
Much-smaller than it’s Soviet counterpart below, the FLAK-38 is represented by fewer parts. The crew consists of an aimer/gunner and a loader.
Details are well-represented on the gun – even bolt heads on both sides of the armored shield are represented. Please note that transport trailer and ammo boxes are not included.
The flash hider is a bit too bulky, but should be easy to replace with a self-made cooking-foil detail. My main concern is that the sprue gate that is located on the barrel is almost as thick, so care should be taken when separating that detail. It could also use some seam-line cleaning, esp. on the small shield just in front of the breech.
