Earlier this month the long-awaited Zvezda quick-build IS-2 finally reached the local hobby shops, so I was quick to grab myself a copy. It’s close to an year late and I was anxious to see what do we actually get.
There are a hull tub (discussed lower), two grey sprues with parts for the hull and turret, a black one for the tracks, decals for 1 main variant (as on the box top) and additional generic numbers.
The first sprue shows the upper hull and most of the suspension and running gear parts. Yes, just as advertised the set does represent the later war production variety, the IS-2m with the “straight nose”, so it supplements rather than replaces the Italeri kit. As opposed to the Italeri kit, the cooling louvres here are molded angled, with spaces between them, so you can see through the grid.
Sprue A – 90 parts for the suspension, engine covers and firewall, front lights, fenders, instrument panel, etc.
Sprue A
Dragon has put its favorite slide molding routine through its paces in this kit, and even without it the effort is still rather impressive. The cooling gills on the bonnet halves have been molded through – and most other kits will require a PE set for this. Also, the pattern on the radiator is discernible even if you look through the delicately molded guard grille.
Sprue A bottom
The heat shield for the muffler also has its cooling gills molded as the real deal, so your weathering efforts here will be worthwhile. Delicate suspension parts and mirror supports, as well as lightbulbs molded in the bottom of the headlamp reflectors really contribute to the feeling you’re dealing with first-rate kit.
Now the Raiden (or Jack as it’s more familiar to the English speakers) might not have been as popular as the Type 0 (A6M), yet to me it represents the change in Japanese philosophy of building military aircraft. The J2M was not transformation of a different type of aircraft, was designed with a powerful engine from the outset, wasn’t supposed to carry 7,7 mm guns and many more firsts. It’s also my first ever Tamiya kit 🙂
I’ve been looking for a 72nd scale model for a while, but Hasegawa’s kit was hard to find and not really worth the price asked. So when this “second-hand” kit showed up for about $10 I didn’t give it any second thoughts.
Well it’s finally out. After two years of promises and a lot of online desperation on modellers’ end it’s in the shops and tonight it reaches my bench.
Two sprues of sand-colored plastic, a black sprue for the threads (total part count is 97) and a small decal sheet plus instructions and safety precautions for $8. Let’s see what’s in.
Sprue 1
I am impressed! Part of the roadwheels are molded as a single detail, however the suspension arms are separate parts, as are the OVM tools! I am sure modellers will find something else to complain about, however before I actually start building the kit I will only comment on the way this kit is molded and so far it looks rather good to me.
After leading for years with its early model StuG IV, in the spring of 2012 DML has released a kit representing the late variety – a welcome addition to the fleet of German vehicles.
Box top
The model is a mix of sprues from existing sprues and a new parts that cater for the parts that are specific to the late production vehicles. Let’s go through the box.
The first thing you notice is that the box is packed with 29 (!) sprues, 4 sheets with metal parts and 216 Magic Link tracks for 1242 parts (if my counting is correct). Sprues are carefully packed together to save space, and putting them back in could turn to be quite the 3D puzzle 🙂
Dragon has moved ahead with their Churchill saga and just a few months later released a Mk. III to the delight of some of us and the horror of others.
Box top
Thanks to the kind editors of Armorama I’ve had the chance to play with the newer release, numbered 7396. Basically it’s the same hull as the Mk. IV release (kit 7424) with a brand new cupola, an extra fuel tank and a different engine deck.
Parts are spread over 5 separately packed sprues – 71 grey styrene and 2 DS runs. There are paint references and decals for three tanks:
Alright, so kits of various Pz Kpfw III “marks” have been around for quite some time, including several versions by Revell, whose releases were (and still are) regarded as the finest depictions of the tank in the scale.
As the Revell kits have gradually became less and less available, Dragon have stepped up with a new-tool Ausf. L (the subject here), M and the N infantry support tank with the 75mm gun, fitted to early marks of the Pz. IV. As you’d gather DML would milk the molds as much as it can, hence the commonality.
I got the kit in 2010 as a replacement for a lost package – I had won an “Achtung, Jabo!” pack with 4 figures, which never arrived for whatever reason.
Actually this was my first Dragon tank and I was eager to open the box and see what’s in. DML didn’t fail to impress. The number of parts is rather large due to sprue sharing with other Ausführungs and even with the Jagdpanther.
Onto the images (click to see larger images). You get sprue A, which is wheels and side armor screens.
Alright, another resin + PE monster from OKB Grigorov, and despite it’s lower Cat. No. (the AT-T was 72007) I got it in the beginning of this year to build for a review.
I must say I liked the kit from first sight. Relatively small number of parts that will make for a detailed, compact model of a vehicle that has a bunch of modifications still in use today, 50 years after its introduction.
So – onto the kit.
All the parts are packaged in zip-lock bags, all protected by bubble wrap and a sturdy white cardboard box. There are
Well,considering the aging releases by ESCI, Airfix and Hasegawa the Braille scale world has been aching for a modern kit of this important machine for quite some time. Well – here’s DML’s attempt.
The kit contains 70 parts:
68 in grey plastic
2 runs of DS track
Oh I hear your cries about NO PE parts, but rest assured – this is a non-issue with the kit.
There are two main hull components, cast as separate parts – the upper one represents the top deck and the fenders, and lower part is the slide-molded hull tub.
Hull tub bottom – a look from front to backHull tub bottom – aft end
It is interesting to note that there are fuel can racks at the aft end of the fenders, and Dragon has included two pairs of British-style 2 gallon cans to be posed there should the modeler so desire.
